FITVII Looki-mini Fitness Tracker Manual

FITVII Looki-mini Fitness Tracker Manual

Lookimini Fitness Watch User Manual

Thank you for choosing our product.
Please read this user manual carefully before use.

What's in the box
  • Smartwatch ×1
  • Charger ×1
  • User Manual ×1
  • Quick Start Guide ×1
  • Heart-shaped After-Sales Card ×1
How to charge your smartwatch (Power adapter not included)
  1. Plug the USB cable into a power adapter.
  2. Connect the power adapter to a wall outlet.
  3. Align the charger with the magnetic charging points on the back of the watch.
  4. Once connected, the screen will show the charging progress.
  5. When fully charged, remove the charger from the watch.
Feature Setup Guide
1.Power Button 2.Touchscreen Display 3.Workout Modes Button
Power Button – Press and hold to turn the watch on or off.
Touchscreen Display – Swipe or tap to navigate through menus and features.
Workout Modes Shortcut Button – Press to quickly access workout or exercise modes.

 

  1. Power Button
  • Turn the watch on or off
  • Wake the screen when it's off
  • Return to the main menu
  • Open the app menu
  • Press and hold for more than 3 seconds to restart or power off the watch
  1. Touchscreen Display When you're on the main screen:
  • Swipe right to open the app menu
  • Swipe left to access quick features
  • Swipe up to check your notifications
  • Swipe down to open quick settings
  • Cover the screen with your palm to turn off the display quickly
Tip: When an animated emoji appears, swipe left or right to exit it and return to the main screen.
  1. Workout Modes Shortcut Button
  • Wake the screen when it’s off
  • Return to the main menu
  • Press to open the workout list
  • When you're already in the workout list, press the button again to quickly start the first workout shown on the screen


Quick Screen Off
When the screen is on (except in AOD mode), simply cover the screen with your palm to quickly turn it off.
Get Started
To ensure a smooth connection between your smartwatch and smartphone, please follow these steps:
  1. Charge your watch For first-time use, make sure to charge the watch for at least 2 hours to fully power it up.
  2. Check compatibility Make sure your smartphone meets the following requirements: Android 6.0 or iOS 10 and above. Your phone should also be connected to mobile data or Wi-Fi.
  3. Download the FitCloudPro app Search for "FitCloudPro" in the App Store, Google Play, or any Android app marketplace and install the app. (Note: Please make sure you download the correct app. It’s completely free.)

  4. Binding Steps: Open the FitCloudPro App=>Tap “Device”=>click "+Add Peripheral Now" or "Bind Device”=>find your device to connect and agree the "binding request" on the watch.

  5. Turn on Bluetooth To successfully connect the watch and mobile phone, please keep Bluetooth enabled on your smartphone.

  6. Allow notifications
    After connecting, the app will prompt you to "Allow access to your Contacts and call history", Tap “Allow/Pair” — otherwise, your watch won’t be able to receive message alerts.

 

Time & date sync Once pairing is complete, the watch will automatically sync the time and date with your smartphone.

Skip phone pairing (optional) If you don’t want to pair with a phone, swipe to the QR code page on the watch when it's first turned on. Press and hold the QR code for 5 seconds to skip pairing and enter the main screen directly.
Note: Some functions will be limited when the watch isn’t connected to a phone — for example, the time may be inaccurate without syncing.
📌 Tip: Always keep your FitCloudPro app up to date for the best experience.


Language: Go to Settings ⚙→“A🔁文” Language to set the watch language.

Set your preferred units (Miles/Km, Kg/Pounds, ℃/℉)
Open the FitCloudPro app → Tap “Me” in the bottom right corner → Tap “Unit Prefer” to customize your settings.

How to disconnect Bluetooth
  • For iOS users: Go to your phone’s Bluetooth settings, find the smartwatch in the device list, then tap "Forget This Device" to disconnect.
  • For Android users: No additional steps are needed to disconnect from Bluetooth. Simply unpair or disconnect through the app if necessary.
How to wear your smartwatch correctly
  1. Don’t wear the watch too tight or too loose. Adjust it so it fits snugly but comfortably — this helps the sensors work properly.
  2. For more accurate readings, keep your arm still and level while taking measurements. Leave about one finger’s space between your watch and wrist for better comfort.
  3. You can tighten the band slightly during workouts, then loosen it afterward for daily wear.
  4. Tattoos, marks, or thick hair on your wrist may affect heart rate accuracy. If needed, wear the watch on the other wrist for better results.

How to remove and replace the watch band
If you purchased additional bands for this model from our store, follow these steps to change the band:
  1. Use a screwdriver to unscrew the original band.
  2. Attach the new band in place.
  3. Reinstall the screws you removed earlier, or use the extra screws that came with the new band.
  4. Screws near the charging port may be pulled by magnets. To make installation easier, press your thumb over the charging port while securing the screw.
Tip: After tightening the screws, press and gently pull on the band to make sure everything is secure.

 

Feature Menu
Swipe right on the main screen to enter the app menu.
To switch menu styles quickly, double-press the power button while in the menu screen. Alternatively, you can go to Settings ⚙(the gear icon)→ Menu Style to choose your preferred layout.
Set Time Format on Your Watch （get off the millitary time)
Swipe down from the main screen to open the quick settings menu. Go to Settings → Set Time → Time Format, then choose between 24-hour or 12-hour format.

 

Looki Animated Emoji Settings
Your watch features animated Looki emojis that appear as reminders or alerts for drinking water, inactivity, alarms, charging, and achieving exercise goals.
  1. On the animation screen, tap the display to switch between different emojis. Tap three times quickly to see a dizzy emoji.
  2. Swipe left or right on the animation screen to exit and return directly to the main screen.
  3. To turn off the animated emojis, go to Settings → Display → Animated expression, then select Disable.

Set AOD (Always-On Display) Watch Face
You can choose between a digital or analog watch face for the always-on display. Go to Settings → Display → AOD Clock to select your preferred style or turn off the AOD feature.
Note:
  1. Enabling AOD will reduce your watch’s battery life.
  2. When AOD is on, gesture-based screen off won’t work.

Workout Mode
Go to the menu and find “Workout” Select your desired exercise mode to start tracking your workout.
You can also add new workout modes from the FitCloudPro app: Go to FitCloudPro App → Device → Sports Push, then choose the workouts you want to send to your watch.

Heart Rate Monitoring
On your watch, open the Heart Rate screen and wait about 45 seconds for the measurement to complete.
The watch supports 24/7 heart rate tracking. To enable this feature, open the FitCloudPro app → Device → turn on “Automatic Health Monitor”. On this page, you can set the heart rate monitoring time period and the high heart rate alarm reminder
Note:
  1. Make sure the watch fits snugly on your wrist and keep your arm still during measurement.
  2. The more health monitoring features you enable, the shorter your battery life will be. Please turn on the features based on your needs.

Blood Oxygen Monitoring
On your watch, open the Blood Oxygen screen and wait about 45 seconds for the measurement to finish.
Note: Make sure your watch fits snugly on your wrist and keep your arm still during the measurement.

 

Blood Pressure Monitoring
On your watch, open the Blood Pressure screen and wait about 45 seconds for the measurement to complete.
The watch supports 24/7 blood pressure tracking. To enable this, open the FitCloudPro app → Device → turn on “Automatic Health Monitor”
Note:
  1. Make sure the watch fits snugly on your wrist and keep your arm still during measurement.
  2. Enabling continuous monitoring will reduce battery life. Please enable it based on your needs.

Stress Monitoring
On your watch, open the Stress screen and wait about one minute for the measurement to complete.
The watch supports 24/7 stress tracking. To enable continuous monitoring, open the FitCloudPro app → Device → turn on “Automatic Health Monitor”
Note:
  1. Make sure your watch fits snugly on your wrist and keep your arm still during measurement.
  2. Enabling continuous monitoring will reduce battery life. Please enable it according to your needs.

 

Special Notes:
  1. Continuous monitoring means all features like heart rate, blood pressure, and stress are measured automatically. Enabling this will shorten battery life, so please turn it on according to your needs.
  2. This product is not an ECG or professional medical device. The above functions are for reference only and should not be used as medical data.

 

Sleep Monitoring
You can view your recent sleep records and different sleep stages. To track your sleep, wear the watch snugly when you go to bed—the device will automatically detect when you’re sleeping.

 

Female Health Features
There are two modes: Menstrual Cycle and Pregnancy. You can log your dates to better understand and track different stages.
Note: This feature is only available when your FitCloudPro app account gender is set to female.

 

Breath Training
This feature offers two breathing exercise durations to help you regulate your breathing and relieve stress. Go to the Breath Training page and select your preferred duration to start training.

 

Message Notifications
Your watch can receive message notifications from your phone. To enable this, please tap “Allow Looki Mini to receive phone notifications” when pairing the watch.
To add more notification types, open the FitCloudPro app → Device → Push Notification, then turn on notifications for the apps you want.
Note: If you didn’t allow notifications during the initial pairing, follow these steps to enable them later:
  • iOS: Find the device Lookimini on the Bluetooth pairing interface of your phone, click the exclamation mark after the device name, and turn on "Share System Notification"
  • Android: In the FitCloudPro app, go to Device → Push Notification, tap “Enable All Notifications”. A permission prompt will appear—follow the on-screen instructions to grant access.
Basic Settings
From the main screen, swipe right to enter the menu list, then scroll to the bottom and tap Settings--the gear icon.
In Settings, you can:
  • Change menu style
  • Switch watch faces
  • Adjust screen brightness
  • Set screen-on duration
  • Set wrist-raise screen-on duration
  • Configure AOD (always-on display) clock
  • Manage animated emojis
  • Enable power-saving mode
  • Adjust vibration settings
  • Change language
  • Download the app
  • Set time format
  • View system information
  • Power off, restart, or reset to factory settings

Switch Watch Face
Go to Settings → Display → Watch Face to choose your preferred watch face. You can also change or customize watch faces via the FitCloudPro app: open the app, go to Device → WatchFace/Dial Library, select a wallpaper or create your own custom watch face (DIY).

Brightness Adjustment
Go to Settings → Display → Brightness, then tap the light bulb icon in the center of the screen to adjust the watch brightness.

Screen-On Duration
Go to Settings → Display → Screen time and select how long you want the screen to stay on.

Wrist Raise to Wake the Screen
Go to Settings → Display → Raise to Wake and choose your preferred duration.

Power Saving Mode
Go to Settings → Battery, then turn on Power Saving Mode.
Note: The battery level display shows in increments of ten, not precise to single digits. Please turn off Power saving mode on the watch when pairing with the App.

Vibration Intensity
Go to Settings → Vibration Intensity. You can turn off vibration alerts or adjust the vibration strength.

Language
Go to Settings → Language to set the watch language.

App Download
Go to Settings → QR Code, then scan the QR code to download the watch’s app.

System
Go to Settings → System to view your watch’s Bluetooth name and MAC address. You can also power off, restart, or restore factory settings here.

Water Resistance Notice
Waterproof Rating: IP68 This smartwatch is rated IP68, which means it’s resistant to water under certain conditions. However, water resistance is not permanent and may decrease over time with regular use.
You can wear it while washing your hands or in light rain, but do not use it during hot showers, swimming, diving, or surfing. Avoid contact with seawater, acidic or alkaline solutions, chemical agents, or any corrosive liquids, as these can damage the device.

Product Specifications
  • Display Size: 1.01"
  • Battery Capacity: 140mAh
  • Bluetooth Version: BLE 5.3
  • Resolution: 184 × 276
  • Device Dimensions: 33.7 × 23.4 × 25.3 mm
  • Gravity Sensor: STK8321

Smartwatch Maintenance
  1. Keep it clean and dry: Wipe the watch regularly to prevent sweat or moisture buildup.
  2. Wear it properly: Make sure the watch fits snugly but comfortably on your wrist.
  3. Avoid extreme temperatures: Don’t leave the device or accessories in very hot or cold places, as it could cause malfunctions, fire, or explosion.
  4. Protect it from impact: Avoid dropping or subjecting the device to strong shocks or vibrations.
  5. Do not disassemble or modify: If your watch isn't working properly, please contact us instead of trying to repair it yourself.
  6. Water resistance caution:
    1. This watch is rated IP68, meaning it's splash-proof and suitable for hand washing or light rain.
    2. Do not use in hot showers, diving, surfing, or expose it to sea water, acidic/alkaline solutions, or any corrosive chemicals.
    3. Water resistance may degrade over time.
  7. If not using for a while: Fully charge the watch at least once every 3 months to keep the battery healthy.
After-sales Service
If you have any questions or need assistance, go to “Get Help” in the menu list of your watch. Please feel free to contact us via email: support@fitvii.com. Our support team will get back to you within 24 hours.

 

 

Regresar al blog