FITVII H56 User Manual

FITVII H56 User Manual

 

Set Language

Please turn on the watch---pull down⬇️ the main interface---tap Settings⚙--the "gear" icon---select the letter “A” icon---choose English

 

Download APP

  1. You can search for the “FitCloudPro” APP in the APP Store/ Google Play and other major app stores to download. 
  2. Use the scan function to scan the QR code of the multi-functional interface to download.
  3. After the installation is successful, please register and log in according to the interface prompts for a better experience and use of this product.

 

Get notifications

Go to the FitCloudPro app---Device---Push Notifications---Turn on the switch of the app you need to receive notifications.

Please don’t forget to allow the notification permission of the phone.

Smartwatch firmware upgrade

The APP will prompt that there is a new watch firmware version. You can enter the APP “Device” interface to Upgrade it.

Notes:

  1. The watch’s battery should be above 60%
  2. During the upgrade process, the mobile phone interface will show an upgrade progress bar, please do not do any operations.

 

Set Time

Once the device is successfully connected to the APP, the time and date will be synchronized with your phone.

 

Change Watch Face

Open the FitCloudPro APP---Device---Watch face (IOS)/Dial Library (Android)--- Choose the watch face you prefer or select the FIRST picture to customize the picture in your gallery as the watch face

 

Switch Units

Open the FitCloudPro APP---Me---Units---Set units for length, weight, or temperature

 

Auto Monitoring

Open the FitCloudPro APP---Device---Turn on the switch of the Automatic Health Monitor and Elevated Heart Rate Measurement

Blood Pressure Calibration

If you have the data from a professional BP monitor, please enter the data into the FitCloudPro APP to calibrate the readings.

Steps: Open the FitCloudPro APP==>Click the "Me"==>Tap your ID==> Switch on the “Private Reference Mode” ==>Input your Blood pressure values to it.

 

Waterproof instructions

Waterproof rating: IP68

The watch is waterproof which you can wear it to swim or do water activities. But it cannot be taken to hot bath,diving.

Supplement: It is not recommended to wear it in a hot bath. Water vapor produced when washing hot water. Its molecular radius is small, and it is easy to seep into the gap of the watch case. When the temperature drops, it will gradually condense into water droplets, which will damage the circuit board of the watch and damage the watch.

Unbind or add device

Open the FitCloudPro app and tap “Device”> “Unbinding Bracelet” or “+Add Peripheral”

NOTE:

  1. The app can only connect to one watch. To connect to another watch, please unbind the connected watch first.
  2. To successfully connect the watch and mobile phone, you need to turn on the Bluetooth connection device of the mobile
  3. If you use an Android phone, it needs to turn on the location information function of the mobile phone system, otherwise, the device may not be searched.

Function introduction

Super long battery life, thin and light smart sports watch. It integrates multiple functions such as multi-sports, heart rate, blood pressure, blood oxygen, sleep monitoring, daily exercise record, instant information reminder, etc. It is suitable for daily health testing and wearing during exercise. After connecting with a mobile phone, you can experience one of the series of functions of the smartwatch.

 

If you have any questions, please feel free to contact us via email: support@fitvii.com

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.